1800 490 514 [email protected]
ANISOPRINTING TECHNOLOGY
MANUFACTURING OPTIMAL COMPOSITES THROUGH CONTINUOUS FIBER 3D ANISOPRINTING
With over 10 years experience in composites manufacturing, Anisoprint are the experts in composite material for 3D printing.
If you need to 3D print super-strong parts that rival metal, that are lightweight and need to print fast, look no further than Anisoprint.
With the ability to print any plastic as a matrix, the Anisoprint system lays continuous fiber to make strong, lightweight parts.
Print for
Mass
Scale
Models
Choose from Desktop A4/A3 sizes or the Industrial large format ProM for non-stop production.
Desktop
Composer A4 and A3
Continuous fiber reinforced composites
Anisoprint Composer Desktop comesin 2 models, the A4 and the A3.
A4 Build Volume: 297x210x140mm
A3 Build Volume: 460x297x210mm
System: Open. Providing users with flexible material choice, fiber volume ratio, parts complexity and fiber laying trajectories
Structure: Optimal composite Lattice reinforcement structures for miminum weight, price and production time.
Industrial
Prom IS 500
Continuous fiber reinforced composites
High-temp plastics up to 400 degrees celsius such as PEEK and PEI
Large Build Volume: 600x420x300mm
Heated Build Chamber up to 160 degrees celsiusÂ
System: Open. Providing users with flexible material choice, fiber volume ratio, parts complexity and fiber laying trajectories.
Made for 24/7 3D production printing.
Structure: Optimal composite Lattice reinforcement structures for miminum weight, price and production time.
Materials
With an open printing system, you have the freedom to use any filament. Choose from Anisoprint materials, extended material profiles from Polymaker and eSun or use your own!
Anisoprint Materials
COMBINE
BASE FILAMENT
WITH
CONTINUOUS FIBER
OR
Plastic Filaments
SMOOTH PA is 10% carbon fiber reinforced PA12 filament, which provides improved
surface quality, strength and warping. Compared to other polyamide filaments on the
market, Smooth PA features low moisture absorption and anti-warping technology.
CFC PA is a non-filled Polyamide 12 developed by Polymaker for Anisoprint CFC (Continuous Fiber
Co-extrusion) technology. The low viscosity of the plastic ensures better adhesion between the fiber
layers, while the fast cooling and solidification rate helps to achieve better fiber placement.
This low water absorption plastic can be printed without a dryer.
Anisoprint has profiles of Anisoprint, generic, Polymaker and eSun filaments. Learn More about the open Anisoprint system, supported filaments and continuous fibers
Aura and Aura Premium Slicing Software
Specially designed software for anisotropic 3D printing to give you the freedom and flexibility to 3D print the most complex structures, lay fibers in the right areas, in the right volumes and direction to achieve the right direction loads and orientations.
- For FFF and CFC printers
- Supports STL, STP, OBJ and 3DS files
- Models saved locally to PC
- G-code generalisation geometry view
- Separate settings and combinations for printers, plastics and profiles
- Layer masks
- Combination of continuous fiber lattice, linear, concentric and curvlinear fiber orientation
- Modify the fiber to volume fraction
- Open system to print any material
- G-Code export
- Headless mode
Get In Touch
If you would learn more about Anisoprint, please contact us by calling on 1800 490 514, by filling out the form or clicking the live chat in the bottom right-hand corner.
Copyright © 2025. All rights reserved